BĄDŹ Z NAMI NA:
Facebook-f Instagram Linkedin Youtube
ŻĄDANIE WSPARCIA
AKTYWACJA PRODUKTU
Not authorized.

WYBIERZ PROBLEM Z LISTY PONIŻEJ:

  1. Make sure the power cable is connected to the mains.
  2. Make sure the electric supply service is compatible with the product and country specifications.
  3. Make sure the main switch on the equipment is in the ON position.
  4. Make sure the emergency button is not activated.
  5. If all the conditions above are met and the problem persists, contact the Authorised Assistance Centre.
  1. Contact the Authorised Assistance Centre.
  1. Make sure the SD card is inserted correctly.
  2. Try to remove the SD card and insert it again.
  3. Make sure the firmware version is always updated to the latest version.
  4. If all the conditions above are met and the problem persists, contact the Authorised Assistance Centre.
  1. Make sure the tanks and scales are clear, and that there are no foreign bodies preventing their operation and proper weight detection.
  2. Make sure the hoses are inserted correctly in the tanks.
  3. If all the conditions above are met and the problem persists, contact the Authorised Assistance Centre
  1. Make sure the hopper’s tightening knob is loose and allows it to slide
  2. If all the conditions above are met and the problem persists, contact the Authorised Assistance Centre.
  1. Make sure the compressed air is connected.
  2. The minimum pressure allowed is 3 bar.
  3. Make sure you have connected the service hose to the vehicle’s system.
  4. If all the conditions above are met and the problem persists, contact the Authorised Assistance Centre.
  1. Make sure the hopper is positioned correctly under the vehicle and without hindrance.
  2. Make sure you have connected the service hose to the vehicle’s system.
  3. Make sure the DRAIN tank is empty.
  4. If all the conditions above are met and the problem persists, contact the Authorised Assistance Centre.
  1. Make sure the service hose is not damaged, bent or pinched.
  2. Make sure the extension is connected correctly to the service hose.
  3. Make sure the receiving tank is empty or has sufficient space to charge the amount of fluid entered by the operator and indicated in the display.
  4. If all the conditions above are met and the problem persists, contact the Authorised Assistance Centre.
  1. Make sure the service hose is not bent or pinched.
  2. Make sure the extension is connected correctly to the service hose.
  3. Make sure the service hose and the extension are inserted correctly in the tank.
  4. If all the conditions above are met and the problem persists, contact the Authorised Assistance Centre.
  1. Do not turn off the equipment during the automatic expansion vessel emptying procedure.
  2. Make sure the vehicle’s system is completely emptied of fluid.
  3. If all the conditions above are met and the problem persists, contact the Authorised Assistance Centre.
  1. Make sure the vehicle’s system has successfully completed the vacuum procedure and that there are no leaks.
  2. Make sure the vehicle’s system is perfectly closed and that all its components have been repositioned correctly before charging it.
  3. Make sure the service hose is not damaged, bent or pinched.
  4. If all the conditions above are met and the problem persists, contact the Authorised Assistance Centre.
  1. Make sure the wheels are free and undamaged.
  2. Make sure the rear wheels are not locked.
  3. If all the conditions above are met and the problem persists, contact the Authorised Assistance Centre.
  1. Turn off the equipment immediately.
  2. If all the conditions above are met and the problem persists, contact the Authorised Assistance Centre.
Jeśli nie znalazłeś rozwiązania Twojego problemu skontaktuj się z naszym działem wsparcia technicznego klikając poniżej
Uzyskaj wsparcie dot. produktu
Informacje kontaktowe
  SUCCESS
Twoja prośba o wsparcie została wysłana.
  ERROR